D-Tract Commercial - 6mm

To use the rope selector please use the filter on the left to make a selection based on your requirements.

Please note there are specific product selectors for Leisure Marine, Commercial Marine, Safety, Lifting & Winching, Windows & Small Cords and for All Ropes and Cords.

The standard D-Tract is adapted to include a polyester cover over the top of the Dyneema®. This delivers a level of wear resistance while also providing a mechanism to retire the rope.

The D-tract commercial build on the success and benefits of the D-Tract standard product that has been proved and tested in the leisure market. In order to provide a comprehensive care and retirement process it is necessary to provide a protective cover to the rope. This polyester cover allows the users to view when the next part of the rope to be damaged is the load bearing core.

Technical Information
 CoreCover
Construction 12 strand n/a
Material Dyneema® n/a
Specific gravity 0.97 n/a
Resistance to acid Very Good n/a
Resistance to alkali Very Good n/a
Resistance to UV Very Good n/a
Resistance to heat Poor n/a
Extension at 50%  
Extension at break  
Data Table
Diameter (mm)Breaking StrainWeight (per 100m)
6  3,900 1.60
8 5,300 3.09
9 7,030 3.80
10 8,770 4.86
11 10,780 5.71
12 12,320 6.64
14 15,300  
Features and Benefits
  • Flexible construction
  • Reduced risk of injury
  • Increased safety in operation
  • Reduced weight
  • Long operational life
  • Wear identifier
Typical Applications
  • Roadside recovery
  • High regulated areas
  • Utility winching