D-Tract Competition XPS - 12mm

To use the rope selector please use the filter on the left to make a selection based on your requirements.

Please note there are specific product selectors for Leisure Marine, Commercial Marine, Safety, Lifting & Winching, Windows & Small Cords and for All Ropes and Cords.

The D-Tract competition takes the D-Tract standard and puts it through the XPS treatment. This provides a winch line with an increased breaking load for the given diameter.

The 12 strand Dyneema® construction has been modified through field trial to meet the challenges of the 4x4 winching world. The changes have made a rope that shows superior wear resistance and ease of handling. The coating has been changed to use the EB L-Coat to ensure maximum longevity while protecting the rope from dirt ingress. The rope is available in finished assemblies or on reel.
The changes above the standard D-Tract winchline are orientated around tenacity. This allows users to achieve a higher breaking load for the same diameter or a lower diameter for the same breaking load.

Technical Information
 CoreCover
Construction 12 strand n/a
Material Dyneema® n/a
Specific gravity 0.97 n/a
Resistance to acid Very Good n/a
Resistance to alkali Very Good n/a
Resistance to UV Very Good n/a
Resistance to heat Poor n/a
Extension at 50%  
Extension at break  
Data Table
Diameter (mm)Breaking Strain (kg)Weight (per 100m)
 9 9,700 5.5
11 13,630 7.6
12 16,000 9.0
13 19,000 11.0
Features and Benefits
  • Increased break load for diameter
  • Motor sport completion approved
  • Increased safety in operation
  • Ability to achieve longer lengths on the spool
  • Specialised coating aligned to 4x4 usage
  • Reduced risk of injury